[Cm60] Att Group, Functions - NEC NEAX 2000 IVS Command Manual

CM60
COMMAND CODE
60
MAT
1. FUNCTION:
This command is used to assign a number to an ATTCON for access on a tenant basis, and define the
consoles' night switching ability, off-hook ringing, tone ringer, password code for Attendant Lockout
and Attendant Programming.
2. PRECAUTION:
(1) CM60 YY = 00, 01, 02, 04, 06 require a system reset after data setting.
(2) The password for ATTCON (YY = 30) cannot be assigned by the MAT mode menu.
(3) When assigning a password code for an ATTCON by CM60 YY = 30, the Function Number (0/1)
is required as the first data. The purpose of Function Numbers is shown below.
0: To assign a password for ATTCON Lockout
1: To assign a password for Attendant Programming
(DISA, System Speed Dialing, Date and Time, and Tone Ringer)
(4) This command is included in MAT mode menu "C2" (ATT Group, Functions [COM02]).
3. ASSIGNMENT PROCEDURE:
ST + 60YY
4. DATA TABLE:
YY
No.
00 ATT GROUP
(
Group
)
No.
01 Designation of Master ATT
( ) within ATT Group
Master
CHAPTER 3
Page 232
Revision 2.0
[CM60] ATT Group, Functions
TITLE:
ATT GROUP, FUNCTIONS
ATTCON
NUMBER
+ DE +
(0 - 7)
MEANING
INITIAL
INITIAL
FUNCTION
NUMBER
+ DE
(0/1)
GROUP NUMBER
DATA MEANING
0 ATT GROUP 0
1 ATT GROUP 1
2 ATT GROUP 2
3 ATT GROUP 3
0 Master ATT
1 Not Master ATT
Note: Master ATT must be
assigned to a single
ATTCON within
ATT Group.
ND-45669 (E)
DATA
+ + EXE
(1 - 8 digits)
RELATED
COMMAND
CM62
CM51 YY = 13
Initial Data
: