NEC NEAX 2000 IVS Command Manual page 115

CM10
COMMAND CODE
10
MAT
SETTING DATA (STATION NUMBER, TRUNK NUMBER, CARD NUMBER)
LEN
DATA
0124 E200
E203
0000 E600
E663
0511
E800
E831
E900
E963
EB000
EB127
EC00
EC31
ED00
ED03
FX
FXX
FXXX
FXXXX
EE3XXX ZT Number (XXX = 000 – 255)
CHAPTER 3
Page 92
Revision 2.0
TITLE:
STATION NUMBER, TRUNK NUMBER, CARD NUMBER
MEANING OF DATA
Circuit Number of DTMF Receiver (PN-CP03)
TAS Equipment Interface activated by Station Ringer.
(Use of LC card)
Card Number of External Equipment Interface (PN-DK00)
When installed in PIM 0/1 . . . . .E800-E807
When installed in PIM 2/3 . . . . .E808-E815
When installed in PIM 4/5 . . . . .E816-E823
When installed in PIM 6/7 . . . . .E824-E831
Card Number of External Key Interface (PK-DK00)
When installed in PIM 0/1 . . . . .E900-E915
When installed in PIM 2/3 . . . . .E916-E931
When installed in PIM 4/5 . . . . .E932-E947
When installed in PIM 6/7 . . . . .E948-E963
Circuit Number of Digital Announcement Trunk (PN-2DATA)
When installed in PIM 0/1 . . . . .EB000-EB031
When installed in PIM 2/3 . . . . .EB032-EB063
When installed in PIM 4/5 . . . . .EB064-EB095
When installed in PIM 6/7 . . . . .EB096-EB127
Add-On Module Number (for ETJ-24DS-1)
When installed in PIM 0/1 . . . . .EC00-EC07
When installed in PIM 2/3 . . . . .EC08-EC15
When installed in PIM 4/5 . . . . .EC16-EC23
When installed in PIM 6/7 . . . . .EC24-EC31
Note: The same number (last two digits of data) should not be used for
both a DSS Console and Add-On Module
Card Number of Conference Trunk (PN-CFTA)
Multiline Terminal Number
<X-XXXX> represents Primary Extension Number
X = 0-9, A(*), B(#)
Note: The total of multiline terminal numbers and virtual station num-
bers can only equal 512, maximum.
ZT Number must be assigned to the first LEN (Level 0) and/or third LEN
(Level 2) of each LT slot.
ND-45669 (E)
RELATED
COMMAND
INITIAL
CM30
YY = 13, 14, 17
CM44
CM61
CM30
CM49
CM90
CM15
YY = 69
INITIAL
CM90
CMAD