[Cm10] Station Number, Trunk Number, Card Number - NEC NEAX 2000 IVS Command Manual

CM10
COMMAND CODE
10
MAT
1. FUNCTION:
This command is used to assign Station Numbers, Trunk Numbers, and Card Numbers to LENs (Line
Equipment Numbers).
2. PRECAUTION:
(1) When deleting a Station Number (Single Line or Multiline Terminal), be sure to delete Call Pickup
data (CM 16), UCD Group data (CM17) and Station Hunting Group data (CM18) in advance.
(2) When assigning the PN-8RSTA (PBR) card (E200–E215), the PN-CFTA card (ED00-ED03) and
the ISDN Circuit (EFX-EFxxxx), a system reset is required after setting the data.
(3) This command is included in MAT mode menu "A1" (Station Number & Class [COM01]) and
"B1" (Trunk number & data [COM01]), and "E10" [Miscellaneous Card (COM02)].
(4) Data Station Numbers are assigned by CM1A.
3. ASSIGNMENT PROCEDURE:
ST + 10 + DE + LEN + DE +
CHAPTER 3
Page 90
Revision 2.0
[CM10] Station Number, Trunk Number, Card Number
TITLE:
STATION NUMBER, TRUNK NUMBER, CARD NUMBER
STATION
NUMBER
(4 digits)
ND-45669 (E)
TRUNK CARD
DATA NUMBER + EXE
(1- 5 digits)