[Cm36] Restriction Data For Tandem Connection - NEC NEAX 2000 IVS Command Manual

COMMAND CODE
36
1. FUNCTION:
This command is used to define restriction data for tandem connection within a system, for each combi-
nation of an incoming trunk route and an outgoing trunk route.
2. PRECAUTION:
Any incoming Trunk Route assigned to "No release signal" in CM35 YY=05, is restricted from tandem
connection.
3. ASSIGNMENT PROCEDURE:
ST + 36 + DE +
4. DATA TABLE:
INCOMING CALL
TRUNK ROUTE
00
63
Note:
The 2-digit Incoming Trunk Route number and the 2-digit Outgoing Trunk Route number are entered as a
concatenated 4-digit number. For example, the value "1824" would represent Incoming Trunk Route "18"
and Outgoing Trunk Route 24.
[CM36] Restriction Data for Tandem Connection
TITLE:
RESTRICTION DATA FOR TANDEM CONNECTION
INCOMING
OUTGOING
TRUNK
TRUNK
+
ROUTE
ROUTE
(2 Digits)
(2 Digits)
Note
OUTGOING
TRUNK ROUTE
DATA
00 0
63 1
ND-45669 (E)
DATA
+ DE +
(0/1)
SETTING DATA
MEANING
Allowed
Restricted
CM36
+ EXE
Initial Data
:
RELATED
COMMAND
CM35 YY = 05
CHAPTER 3
Page 175
Revision 2.0