2.2 CAT Operation
When setting the office data, it is necessary to enter the following three kinds of data:
•
Command Code
•
First Data
•
Second Data
An explanation of the data entry procedure follows:
(a) Operation for confirming the existing office data
+ Command Code +
ST
With the above entry completed, the present second data is displayed on the LCD.
If the second data is not assigned yet, either the initial data value or "NONE" is displayed.
(b) Operation for assigning (changing) the office data
+ Command Code +
ST
With EXE pressed, "OK" is displayed on the LCD.
To confirm the data assigned, depress DE after entering the first data.
S
(c) Use of
S
•
If
is pressed after setting the second data (after
is displayed.
–
•
If
is pressed after setting the second data (after
played.
+ First Data +
DE
+ First Data +
DE
–
button and
button
ND-45669 (E)
INFORMATION FOR DATA PROGRAMMING
DE
+ Second Data +
DE
EXE
has been pressed), the next first data
EXE
has been pressed), the last data is dis-
+
DE
EXE
CHAPTER 2
Page 7
Revision 2.0