[Cm59] Tas/Acd/Ucd Relay Interruption Pattern - NEC NEAX 2000 IVS Command Manual

CM59
COMMAND CODE
59
1. FUNCTION:
This command is used to assign the interruption pattern on the TAS and ACD/UCD indicators controlled
via the PN-DK00 card.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
ST + 59 + DE + NUMBER
4. DATA TABLE:
FUNCTION NUMBER
00
CHAPTER 3
Page 230
Revision 2.0
[CM59] TAS/ACD/UCD Relay Interruption Pattern
TITLE:
TAS/ACD/UCD RELAY INTERRUPTION PATTERN
FUNCTION
+ DE +
(2 digits)
PURPOSE
TAS/ACD/UCD RELAY
INTERRUPTION PATTERN
(See CM44-13xx/14x)
ND-45669 (E)
DATA
+ EXE
(2 digits)
DATA
01 30 IPM
02 60 IPM
03 120 IPM
07 Steady on
Initial Data
:
MEANING