[Cmd000] System Features (1) - NEC NEAX 2000 IVS Command Manual

CMD001
COMMAND CODE
D001
1. FUNCTION:
This command is used to assign various SMDR and PMS functions, and the interface conditions for the
SMDR terminal, printer and PMS.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
ST + D001 +
4. DATA TABLE:
DATA
1 Method of charging a transferred call
• In the following are shown the stations to which call charging
is to be made in the case of various transfer patterns.
• Call transfer from
STA A to STA B
Call transfer from
a station (STA) to STA
ATTCON
• Call transfer from
ATTCON to a
station (STA)
• Call transfer from
ATTCON A to
ATTCON B
Note: Refer to Tables 3-1 through 3-5.
CHAPTER 3
Page 372
Revision 2.0
[CMD001] System Features (2)
TITLE:
SYSTEM FEATURES (2)
1ST DATA
DE + +
(1–3 digits)
1ST DATA
FUNCTION
2ND
DATA=0 DATA=1 DATA=2
Split charging
to STA A & STA B
STA B
STA
Split charging
to ATTCON A ATTCON ATTCON
and ATTCON B
ND-45669 (E)
2ND DATA
DE + + EXE
(1 digits)
0
2ND 2ND
1
STA A 2
STA STA
STA STA
B A
:
2ND DATA
: Split charging to both the transfer
destination station and the transfer-
ring station.
: Charging to the transfer destination
station.
: Charging to the transferring station.
Initial Data