[Cmd5] Id Code Assignment With Ap - NEC NEAX 2000 IVS Command Manual

CMD5
COMMAND CODE
D5
1. FUNCTION:
This command sets up the ID codes used for the Authorization Code and Forced Account Code features
with the AP01 card. The last two digits of the ID code can be used as a check code which is automati-
cally generated according to the data in Y = 0 and Y = 1, if required.
2. PRECAUTION:
These ID codes are available, when CM 08-216/217 are set to "1".
3. ASSIGNMENT PROCEDURE:
ST + D5Y + DE +
4. DATA TABLE:
Y
No. MEANING
0 Required digits for gener-
ating the 1st and 2nd
check codes.
X...............X X X
ID Code
1 Setting of Check Sum
Data
2 Check Sum Value
CHAPTER 3
Page 336
Revision 2.0
[CMD5] ID Code Assignment With AP
TITLE:
ID CODE ASSIGNMENT WITH AP
1ST DATA
+ DE +
(1 - 10 digits)
1ST DATA
DATA
0 Designation of digits to
be totalled for generating
the 1st Check Code.
1 Designation of digits to
be totalled for generating
2nd
the 2nd Check Code.
Check
Code
1st
Check
Code
0 For generating the 1st
Check Code
1 For generating the 2nd
Check Code
0 Used in calculating the
1st Check Code
1 Used in calculating the
2nd Check Code
ND-45669 (E)
2ND DATA
+ EXE
(1 - 9 digits)
MEANING DATA
00 XX
0-9
2ND DATA
MEANING
00: No Check Code
Note 1
01 - FF:
Check Sum Data
(Enter desired value.)
0 Check Sum Value
9