[Cme9] Password Code - NEC NEAX 2000 IVS Command Manual

COMMAND CODE
E9
MAT
1. FUNCTION:
This command is used to define the Password Code of each Password Level and the availability of Pass-
word Service.
2. PRECAUTION:
(1) Before setting the Password code, Function Number 8 (Change of Password) must be set to 0
(Allowed).
(2) When programming a Password Code, the Password Code for Password Level 7 must be made. If
no Password Code of Password Level 7 is set, the programming of Password Service provision
(CME9, FUNCTION No. 9) is restricted with the message "CODE NOT USED".
(3) Function No. 9 (Password Service) must be set to 0 (Provided) after programming of all Password
Codes is completed.
3. ASSIGNMENT PROCEDURE:
ST + E9 + DE +
4. DATA TABLE:
PASSWORD LEVEL No. /
FUNCTION No.
0 Password Level 0
7 Password Level 7
8 Change of Password
(Display of Password)
9 Password Service
Note: Password Level 7 can access all the commands.
[CME9] Password Code
TITLE:
PASSWORD CODE
PASSWORD LEVEL NO.
/FUNCTION NO.
(1 digit)
SETTING DATA
DATA
X
XX
X . . . X
(Max. 8 digits)
0
1
0
1
ND-45669 (E)
+ DE + DATA + EXE
MEANING
Password Code
Allowed
Restricted
Provided
Not provided
Note
Initial Data
:
REMARKS
Following Password Codes are
not available:
"CC . . . C" (All "C")
"FF . . . F" (All "F")
CHAPTER 3
Page 351
Revision 2.0
CME9