NEC NEAX 2000 IVS Command Manual page 428

COMMAND CODE
D001
DATA
158 Guard timer between texts on No. 3 Port
160 Mask Data provision for 1st digit of Authorization Code
175 Mask Data Provision for 16th digit of Authorization Code
179 Number of CCH card provided in the system (This data should be
assigned only for the center office for Centralized Billing-CCIS)
199 PMS - Send and receive PMS messages using Block Check Code
(BCC)
239 Direction for sending of billing information from the local office
(This data should be assigned only for the center office for Cen-
tralized Billing-CCIS)
Note: Refer to Tables 3-1 through 3-5.
TITLE:
SYSTEM FEATURES (2)
1ST DATA
FUNCTION
ND-45669 (E)
2ND DATA
Note 0 : 0-128 msec
1 : 128-256 msec
2 : 256-384 msec
3 : 384-512 msec
4 : 512-640 msec
0 : Not provided
1 : No. of n (1-16) digit + 1 is provided
11 : No. of n (1-16) digit + 1 is provided
12 : "X" is provided. The data (digits)
are masked by character "X" (e.g.,
555XXXX).
0 : Not used
1 : 1 CCH card
2 : 2 CCH cards
3 : 3 CCH cards
4 : 4 CCH cards
0 : Without BCC
1 : With BCC
0 : Not used
1 : SMDR Terminal which is set to "4"
by CMD001-80/100/120
2 : SMDR Terminal which is set to "5"
by CMD001-80/100/120
CMD001
Initial Data
:
CHAPTER 3
Page 385
Revision 2.0