[Cm11] Virtual-Line Number - NEC NEAX 2000 IVS Command Manual

CM11
COMMAND CODE
11
MAT
1. FUNCTION:
This command is used to assign station numbers, Intercom numbers, Loop Line numbers and ICI/OPR
Line numbers (for a Multiline Terminal Attendant Position), to Virtual-Lines assigned on a Multiline
Terminal.
2. PRECAUTION:
(1) The Virtual-Line station numbers must be different from station numbers assigned by CM10.
(2) The virtual LENs (Line Equipment Numbers) have no relationship with the LENs used in CM10.
Therefore, any virtual LENs can be assigned to each Virtual-Line station number.
(3) The following station data can be assigned to the Virtual-Line station numbers:
• Station Class-1 (CM12)
• Station Class-2 (CM13)
• Call Pickup Group (CM16)
(4) This command is included in MAT mode menu "A1" (Station number & Class [COM01]).
3. ASSIGNMENT PROCEDURE:
ST + 11 +
4. DATA TABLE:
VIRTUAL
LEN
0000
0255 XXXX
A000
A031
A100
A131
CHAPTER 3
Page 96
Revision 2.1
[CM11] Virtual-Line Number
TITLE:
VIRTUAL-LINE NUMBER
Virtual
DE + + DE
LEN
(4 digits)
VIRTUAL-LINE NUMBER
X Station Number (1-4 digits)
X = 0-9, A(*), B(#)
Note: The total of multiline terminal numbers and virtual
station numbers can only equal 512, maximum.
Automatic Intercom Number (Refer to
AX
0/1 to be made one pair
VIRTUAL-LINE
+
NUMBER
(1–4 digits)
Note
XX
Automatic Intercom Group No.
(00-31)
ND-45669 (E)
Addendum-001
AUGUST, 1998
INTERCOM
+ EXE
NUMBER
(4 digits)
RELATED
COMMAND
CM20
CM90
1) CM12 YY = 03
CM56 YY = 10
CM90