NEC NEAX 2000 IVS Command Manual page 93

CM08
COMMAND CODE
08
BASIC SERVICE FEATURE
078 This setting determines the trunk seizing sequence when CM
35 YY = 83 is set to 0.
Note: When NEAX 2000/1000IVS is installed with loop-
start trunks, it is important to select the highest
available trunk setting to prevent call collisions.
085 Types of PS No-Answer timer
086 Whether PS Out of Cell/PS Power Off are separated from No-
Answer.
Note: This data is effective only when CM08-086 is set to
0.
088 Whether the Home PBX Numbering Plan is the Open Num-
bering System or Closed Numbering System.
094 Paging access tone sent to station
095 Hook flash (break pulse) sent to Radio Paging equipment
from station
096 Hook flash (break pulse) sent to Speaker Paging equipment
from station
101 When data for "102" is "0" (For Single Line Telephone)
102 When the station (STA-A), after holding the other station
(STA-C), has made a switch hook flash while talking with an-
other station (STA-B).
This data is applied to single line telephone station.
103 When the station (STA-A), after holding a C.O. call, has
made a switch hook flash while talking with another station
(STA-B).
104 When the data for "103" is "0"
109 Periodic record tone on live record
CHAPTER 3
Page 74
Revision 2.1
TITLE:
BASIC SERVICE FEATURES
ND-45669 (E)
Addendum-001
AUGUST, 1998
SETTING DATA
0 Highest available trunk
1 Lowest available trunk
0 No Answer timer (CM41 • Y = 0-86)
1 No Answer timer (CM41 • Y = 0-01)
0 Separated
1 Not separated
(Handled as No-Answer)
0 Closed Numbering System
1 Open Numbering System
0 Send
1 Not sent
0 Send
1 Not sent
0 Send
1 Not sent
0 The call with STA-B is disconnected,
and STA-A returns to STA-C.
1 Three-Party Conference
0 See the data for "101".
1 STA-B is held, and STA-A returns to
the connection with STA-C.
(Broker's Call)
0 See the data for "104".
1 STA-B is held, and STA-A returns to
the connection with the C.O. line.
(Broker's Call)
0 The call with STA-B is disconnected,
and STA-A returns to the C.O. line.
1 Three-Party Conference
0 Send
1 Not sent
Initial Data
: