NEC NEAX 2000 IVS Command Manual page 387

CMDB
COMMAND CODE
DB
YY
No. MEANING
04 Ringing Tone
05 Calling Number/
Calling Name Display
06 Call Waiting for each calling
number
07 UCD Priority Queuing for
each calling number
12 Priority for name display
30 Trunk Tenant Number for
Calling Number
Development and Type of
Single Data Message Frame
Format
90 Caller ID Receiver Memory
All Clear
91 Caller ID Receiver Memory
Clear for Development Table
Number assigned by CMDC
and Development Data
assigned by CMDB
92 Caller ID Receiver Memory
Clear for Development Data
assigned by CMDB
CHAPTER 3
Page 344
Revision 2.0
TITLE:
CALLING NUMBER DEVELOPMENT DATA
1ST DATA
DATA MEANING
0-1499 Calling Number
Development Table
Number assigned by
CMDC
0 Trunk Tenant
Number
Development
1 Single Data
Message Frame
Format
0000
ND-45669 (E)
DATA
0
1
2
3
0
1
0
1
0
0
1
0
1
0
1
— CCC
Initial Data
:
2ND DATA
MEANING
Depends on CM35 YY=33
Not used
Internal Ringing Tone
External Ringing Tone
Calling Number Display
Calling Name Display
Not available
Available
Not priority
Priority
Calling name received from
network
Name assigned by CMDB YY=00
Using Development Table for
Trunk Tenant 00
(CMDC YY=00)
Using Development Table for
actual Trunk Tenant
(CMDC YY=00-63)
With Time Parameter
Without Time Parameter
Clear
Note: Before clearing data,
SW1-1 to SW1-4 on
CALLER ID Receiver
Trunk should beset to
"ON" (Make-busy);
and after memory clear,
restore them to "OFF".