[Cm26] Closed Number Development - NEC NEAX 2000 IVS Command Manual

COMMAND CODE
26
MAT
1. FUNCTION:
For each access code assigned to a closed number block, a trunk route is selected and the system is
assigned to
a) Repeat the access code as a dialed digit (to the C.O.)
b) To add digits to convert the access code into other digits
These assignments are completed prior to dialing the rest of the number.
For closed number assignments requiring development of route advance, tenant, and kind of calling ter-
minal data for trunk route assignment, each of these developments and the corresponding trunk routes
are assigned using CM22, CM23 and CM24.
2. PRECAUTION:
(1) For the outgoing call by the closed number, Toll Restriction is not available.
Set CM 35 YY=11 to "3".
(2) This command is included in MAT mode menu "B3" (Closed number [COM01]).
3. ASSIGNMENT PROCEDURE:
ST + 26Y + DE +
[CM26] Closed Number Development
TITLE:
CLOSED NUMBER DEVELOPMENT
CLOSED NUMBER
BLOCK No.
(00-31)
ND-45669 (E)
DATA
+ DE +
(1-10 digits)
CM26
+ EXE
CHAPTER 3
Page 147
Revision 2.0