[Cmd004] Office Number Assignment - NEC NEAX 2000 IVS Command Manual

COMMAND CODE
D004
1. FUNCTION:
This command is used to assign the office number of the calling party and the office number of the bill-
ing office for centralized billing.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
ST + D004 + DE +
4. DATA TABLE:
DATA
55 Assignment of office number of calling party
The office number is output to SMDR when the office num-
ber of calling party is not sent from the local office of the call-
ing party.
56 Assignment of office number of billing office
Note: If using a leading digit(s) of 0 and 0 is required to print at the host terminal, enter "A" for each leading 0 to be
printed. If the leading digit(s) 0 is not required to print at the host terminal, enter "0".

[CMD004] Office Number Assignment

TITLE:
OFFICE NUMBER ASSIGNMENT
1ST DATA
+ DE +
(1 - 2 digits)
1ST DATA
FUNCTION
ND-45669 (E)
Addendum-001
AUGUST, 1998
2ND DATA
+ EXE
(1 - 4 digits)
X - XXXX: Office No. of calling party
Note
X - XXXX: Office No. of billing office
Note
CMD004
2ND DATA
CHAPTER 3
Page 395
Revision 2.1