[Cme0] Initialization - NEC NEAX 2000 IVS Command Manual

COMMAND CODE
E0
1. FUNCTION:
This command allows the maintenance personnel to reset the system with the CAT.
2. PRECAUTION:
If the setting data (Month, Day and Time) is different from the current time of the system clock (set by
command 02), any request to initialize the system is not accepted and "DATA ERROR" is displayed.
3. ASSIGNMENT PROCEDURE:
ST + E0Y + DE +
4. DATA TABLE:
Y
No. MEANING
2 System Initialization
5 Desired FP/AP
Initialization
Note: For the Data "MMDDHHMM", enter the Month, Date, and Time (hour and minute) of the time, as shown below.
MM : Month (01 (Jan.) – 12 (Dec.))
DD : Date (01 – 31)
HH : Hour (00 – 24)
MM : Minute (00 – 59)
[CME0] Initialization
TITLE:
INITIALIZATION
TYPE OF INITIALIZATION
(2 - 4 digits)
TYPE OF INITIALIZATION
No. MEANING
2000 MP Reset
00 FP/AP Number 00
15 FP/AP Number 15
ND-45669 (E)
DATA
+ DE + + EXE
(8 digits)
SETTING DATA
DATA MEANING
MM Current time dis-
DD played on Multiline
HH Terminal/SN610
MM ATTCON
Note
To request the ini-
tialization immedi-
ately.
CME0
RELATED
COMMAND
CM02
CM05
CHAPTER 3
Page 347
Revision 2.0