Table 3-1 Quick Reference Data Table For Smdr (Neax2400 Ims Format) - NEC NEAX 2000 IVS Command Manual

CMD001
COMMAND CODE
D001
Table 3-1 through Table 3-5 show the quick reference data table for the SMDR, printer, PMS, and MCI.

Table 3-1 Quick Reference Data Table for SMDR (NEAX2400 IMS Format)

1ST DATA
PORT 0 PORT 1 PORT 2 PORT 3
20 24
21 25
22 26
23 27
80 100
81 101
82 102
83 103
84 104
85 105
86 106
87 107
89 109
90 110
91 111
92 112
93 113
94 114
95 115
96 116
98 118
Note 1: The Port 3 cannot be used for the SMDR (NEAX2400 IMS Format).
Note 2: Use 2nd data=4 for either SMDR or PMS. If 2nd data=4 is assigned to Port 0 (1st data=80) for
SMDR/PMS, assign 2nd data=5 to Port 1 (1st data=100) or Port 2 (1st data=120) for SMDR.
CHAPTER 3
Page 386
Revision 2.0
TITLE:
SYSTEM FEATURES (2)
28 – Data speed
29 – Stop bit length
30 – Data length
31 – Parity
120 – Function
121 – Priority for data processing
122 – Message format
123 – Number of lines per page
124 – Protocol
125 – Station Address (SA)
126 – Unit Address (UA)
127 – Timer for detecting terminal no answer
129 – Timer for detecting end of block
130 – Timer for detecting non data communication
131 – Number of times to resend Selecting Sequence
when NAK is returned in Phase 2
132 – Number of times to resend Selecting Sequence
when no answer in Phase 2
133 – Number of times to resend Selecting Sequence
when NAK is returned in Phase 3
134 – Number of times to resend Selecting Sequence
when no answer in Phase 3
135 – Delay before resending Selecting Sequence
when NAK is returned
136 – Delay before resending text when WABT is
returned
138 – Guard timer between texts
MEANING
ND-45669 (E)
: Initial Data
2ND
MEANING
DATA
2/3/4/5 1200/2400/
4800/9600 bps
0 /1/2 1/1.5/2 bits
0 /1 7/8 bits
0 /1/2 None Parity/Even
Parity/Odd Parity
4/5 SMDR
Note 2
0 1st priority
3 NEAX2400
IMS format
0 Not used
1 Free wheel
48 0
33 !
0 Not used
0 Not used
0 Not used
0 Not used
0 Not used
0 Not used
0 Not used
0 Not used
0 Not used
0 Not used