NEC NEAX 2000 IVS Command Manual page 418

COMMAND CODE
D001
DATA
32 Data Speed for No. 3 Port
AP INITIAL
33 Stop Bit for No. 3 Port
AP INITIAL
34 Data Length for No. 3 Port
AP INITIAL
35 Parity for No. 3 Port
AP INITIAL
36 Message format which is sent to VMS with MCI
39 Expansion RAM card (SRAM card) for PN-ME00 card is
provided.
80 Function of No. 0 Port
AP INITIAL
Note 1: Two SMDR terminals or one SMDR terminal + one PMS terminal can be provided in one
system via the No. 0 through No. 2 port. The kind of call information that is sent to the
SMDR terminal can be specified respectively by CMD016-XX16, XX17, XX21, XX22, XX30
and XX55. To the PMS terminal, only CMD016-XX16 is available. The following table
shows examples of the configuration and its data setting.
Note: Refer to Tables 3-1 through 3-5.
TITLE:
SYSTEM FEATURES (2)
1ST DATA
FUNCTION
ND-45669 (E)
2ND DATA
:
Note 0 Not used
1 : 300 bps
2 : 1200 bps
3 : 2400 bps
4 : 4800 bps
5 : 9600 bps
Note : 1 bit
0
1 : 1.5 bits
2 : 2 bits
Note
0 : 7 bits
1 : 8 bits
Note
0 : No parity
1 : Even parity
2 : Odd parity
0 : Conventional (without ANI)
1 : Expanded (with ANI)
0 : Not provided
1 : Provided
Note
0 : No function
4 : SMDR/PMS
5 : SMDR
16 : Printer 0
17 : Printer 1
24 : MCI
CMD001
Initial Data
:
Note 1
CHAPTER 3
Page 375
Revision 2.0