[Cmd100] System Data Partial Clear - NEC NEAX 2000 IVS Command Manual

CMD100
COMMAND CODE
D100
1. FUNCTION:
This command is used to delete the data related only to the designated Command Code among the Sys-
tem Data for Billing and for assigning "0" as the data.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
ST + D100
Command Code of the data to be deleted
Note: Before clearing the system data by this command, make the following switch setting on the PN-AP00 card.
SW1
ON
CHAPTER 3
Page 408
Revision 2.0

[CMD100] System Data Partial Clear

TITLE:
SYSTEM DATA PARTIAL CLEAR
+ DE + DXXX + DE +
4
3
: Position to be set
2
1
CCC + EXE
ND-45669 (E)
AP OFF LINE