[Cmdc] Calling Number Development Table - NEC NEAX 2000 IVS Command Manual

CMDC
COMMAND CODE
DC
1. FUNCTION:
This command is used to assign the calling number development table number for CALLER ID, to each
calling number.
2. PRECAUTION:
Clearing all data in memory for calling number development (CMDB YY=90) is necessary before
assigning the calling number development data by CMDB and CMDC.
The development data by CMDB and CMDC are assigned toward the first CIR card (PN-4RSTC), which
has been assigned a minimum Slot Number. When providing multiple CIR cards, save the development
data and load them for the other CIR cards using a MAT. For details of the procedure, refer to the Feature
Programming Manual.
3. ASSIGNMENT PROCEDURE:
ST
+ DCYY
4. DATA TABLE:
YY
No. MEANING
00-63 Trunk Tenant Number
CHAPTER 3
Page 346
Revision 2.0
[CMDC] Calling Number Development Table
TITLE:
CALLING NUMBER DEVELOPMENT TABLE
CALLING
DE
+ +
NUMBER
(1-24 digits)
DATA
X...XXX
DEVELOPMENT
DE
+ +
TABLE No.
(1-4 digits)
1ST DATA
MEANING
Calling Number
ND-45669 (E)
EXE
+
2ND DATA
DATA MEANING
0-1499 Calling Number Development
Table Number
Initial Data
: