[Cmaf] Visitor Ps Data Assignment - NEC NEAX 2000 IVS Command Manual

COMMAND CODE
AF
MAT
1. FUNCTION:
This command assigns the Visitor PS data.
2. PRECAUTION:
This data setting is valid when DBM (AP00) card is online.
3. ASSIGNMENT PROCEDURE:
ST + AFYYY +
4. DATA TABLE:
YYY
No. MEANING
000 Assignment of Home
PBX ID for Visitor PS
001 Route Selection Pattern
Assignment for Visitor
PS
002 Trunk Restriction Class
in Day, Night Mode for
Visitor PS
100 Trunk Route Selection
for location registration
107 of Visitor PS
200 Trunk Route for origi-
nating/terminating calls
from/to Visitor PS
TITLE:
VISITOR PS DATA ASSIGNMENT
1ST DATA
DE + +
(1-7 digits)
1ST DATA
DATA
X-XXXXXXX Home PBX ID
(1-7 digits, Decimal)
000-255 Data Table No.
Assigned by CMAF
YYY=000
000-255 Data Table No.
Assigned by CMAF
YYY=000
1 First Selected Route
4 Fourth Selected Route
1 First Selected Route
ND-45669 (E)
Addendum-002
JANUARY, 1999
2ND DATA
DE +
(1-5 digits)
MEANING
+ EXE
: Initial Data
2ND DATA
DATA MEANING
000-255 Data Table No. 000-255
CCC Data clear
NONE No data
00-07 Route Selection Pattern
No. 00-07
CCC Data clear
NONE No data
01 Unrestricted (RCA)
02 Nonrestricted 1 (RCB)
03 Nonrestricted 2 (RCC)
04 Semirestricted 1 (RCD)
05 Semirestricted 2 (RCE)
06 Restricted 1 (RCF)
07 Restricted 2 (RCG)
08 Fully Restricted (RCH)
NONE Not used
00-63 Q-931a D Channel
Trunk Route No.
CCC Data clear
NONE No data
00-63 Trunk Route No. 00-63
NONE No data
CHAPTER 3
Revision 2.2
CMAF
Page 327-2