NEC NEAX 2000 IVS Command Manual page 106

COMMAND CODE
08
BASIC SERVICE FEATURE
311 Display last calling station number.
Note: This is only applicable for an ETJ-16DC-1, an ETJ-
16DD-1 or an ETJ-24DS-1.
319 On a Tie Line outgoing call with answer signal, transferring/
holding the call before distant called station answers. (Effec-
tive only when CM35 YY = 00 is 03 or 04 and CM35 YY =
04 is 02.)
322 Answering method of Camp-on (Call Waiting Method).
324 Direct-In Termination-Outside
(In case of no release signal on Incoming Trunk and both an-
swer and release signals on Outgoing Trunk.)
331 Sender Prepause for the outgoing call via ATTCON
333 Mail box number sent to VMS when VMS is recalled after
transferring the call to an unanswered station.
334 Call to a station, set with a Return Message Schedule Display,
receives ringing.
335 Station number and name display when an incoming call be-
gins ringing in.
352 When a call is transferred by DISA to a predetermined station
and time-out occurs, the call is continued or dropped (CM30
YY=30; CM41 Y=0, Function No. 39).
353 Buzzer sound when terminating an incoming call to an AT-
TCON that is in Attendant Console Lockout.
357 Diversion display on Multiline Terminal/ATTCON when
originating/terminating a call.
359 When a call is transferred by an Automated Attendant to a
predetermined station and time-out occurs, the call is contin-
ued or dropped (CM30 YY=30, 31, 32, 33; CM41 Y=0, Func-
tion No. 39).
361 Dial "**" is automatically added to the digits sent to the Radio
Paging System.
TITLE:
BASIC SERVICE FEATURES
ND-45669 (E)
Addendum-001
AUGUST, 1998
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
INITIAL
1
0
1
0
1
0
1
0
1
0
1
SETTING DATA
6 seconds
Until next call
Not available
Available
Same as Camp-on transfer-method
(SHF + Call Hold Access Code/ANS
key)
Alternating between two calls by
switchhook flash/ANS key.
Allowed
Restricted
To provide
Not provided
To send
Not sent
Available (ringing)
Not Available (ROT connection)
Station number and name display
when an incoming call terminates to
the Prime Line.
Station number and name display
when an incoming call terminates to
the Prime Line or Primary Extension.
Disconnect call
Continue call
Not provided
To provide
Available
Not available
Disconnect call
Continue call
Allowed
Restricted
CM08
Initial Data
:
CHAPTER 3
Page 83
Revision 2.1