NEC NEAX 2000 IVS Command Manual page 422

COMMAND CODE
D001
DATA
102 Message format on No. 1 Port (when 2nd data
of CMD001-100 is set to 4)
AP INITIAL
Number of characters per line to be printed out on
No. 1 port (when 2nd data of CMD001-100 is set to 16/17
AP INITIAL
103 Number of lines per page on No. 1 port
(when 2nd data of CMD001-102 is set to 2)
AP INITIAL
104 Protocol on No. 1 Port (when the 2nd data of CMD001 – 100 is set
to 4)
AP INITIAL
Number of lines per page to be printed out on No. 1 Port (when the
2nd data of CMD001–102 is set to 2)
AP INITIAL
105 Station Address (SA) of a message transmitted to No. 1 Port
AP INITIAL
Unit Address (UA) of a message transmitted to No. 1 Port Note 0
106
AP INITIAL
107 Timer for detecting the terminal no answer on No. 1 Port
AP INITIAL
109 Timer for detecting the end of block on No. 1 Port
AP INITIAL
Note: Refer to Tables 3-1 through 3-5.
TITLE:
SYSTEM FEATURES (2)
1ST DATA
FUNCTION
ND-45669 (E)
2ND DATA
Note 0 : No data is sent out
3 : NEAX2400 IMS format
4 : NEAX1400 IMS format
6 : PMS (IMS format)
Note 0 : Not used
2 : 80 characters
Note :
0 No page
1 : No. of lines including space within
a page (depends on size of print
88 : paper used)
0 :Not used
Note 1 :Free wheel
6 :IMS procedures
0 : No page
Note
1 :
No. of lines to print within a page
88 :
0 : Not used
Note
1 :
ASCII Code in BCD
255 :
: Not used
1 :
ASCII Code in BCD
255 :
0 : No data
Note
1 :
128 msec increments
255 :
Note
0 : No data
1 :
512 msec increments
255 :
CMD001
Initial Data
:
CHAPTER 3
Page 379
Revision 2.0