NEC NEAX 2000 IVS Command Manual page 140

COMMAND CODE
16
MAT
4. DATA TABLE:
Y
No. MEANING
0 Assignment of Station
Numbers to be included
in a Call Pickup Group
2 Assignment of Station
(CF-DA Number to be included
SYS in Group Diversion
STA)
3 Display of Station Num-
bers included in a Call
Pickup Group
TITLE:
CALL PICKUP GROUP/GROUP DIVERSION GROUP
STATION NUMBER (A)
DATA
X Station Numbers (A)
XXXX
When assigning station numbers to a Call Pickup Group, only two station
numbers can be assigned per operation. Thus, by repeating the operation as
often as required, all the station numbers to be included in a Call Pickup
Group can be assigned. The two station numbers to be assigned by one op-
eration are defined as Station Number (A) and Station Number (B).
For example, when defining a Call Pickup Group with Station Numbers 300,
301, and 302, three operations are performed.
1st Operation
2nd Operation
3rd Operation
By these three operations, a chain of three lines is set up. As seen above,
one station can be either Station Number (A) or Station Number (B). Thus,
Station Number (A)/(B) is used for identifying which of the two station
numbers is to be set first.
X Station Numbers to be
included in Group Di-
XXXX version
By entering a Station Number as the first data, the station numbers included
in the Group are displayed by depressing the
1st
2nd
3rd
ND-45669 (E)
MEANING DATA
X
XXXX
Station Number (A)
300
301
302
00
30
OPERATION
STN A +
DE
+
DE
+
DE
SETTING DATA
MEANING
Station Number (B)
Station Number (B)
301
302
300
Group Diversion Group 00
Group Diversion Group 30
(See CM19 Y = 6)
key.
DE
DISPLAY
STN A: STN B
STN B: STN C
STN C: END
CHAPTER 3
Page 115
Revision 2.0
CM16