[Cmd027] Call Charge Development Tables - NEC NEAX 2000 IVS Command Manual

COMMAND CODE
D027
1. FUNCTION:
This command is used for assigning the charging method to each dialled digit on the basis of each Devel-
opment Table designated by CMD026.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
ST + D027 + DE +
4. DATA TABLE:
XXX X
Dialed digit (0 - 9, A(*), B(#)) Note
Development Table No. (000 - 255)
Note: The actual digits sent from a trunk should be assigned.

[CMD027] Call Charge Development Tables

TITLE:
CALL CHARGE DEVELOPMENT TABLES
1ST DATA
+ DE + 2ND DATA + EXE
(2 - 4 digits)
1ST DATA
ND-45669 (E)
2ND DATA
1 : Do not send to SMDR terminal
XXX3 : Refer to next digit assignment
[XXX: Next Development
Table No. (000-255)]
9 : Send to SMDR terminal
CMD027
Initial Data
:
CHAPTER 3
Page 401
Revision 2.0