[Cmd016] Station Features - NEC NEAX 2000 IVS Command Manual

CMD016
COMMAND CODE
D016
1. FUNCTION:
This command assigns the class functions for each class assigned by CMD015.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
+ D016 +
ST
4. DATA TABLE:
DATA
XX05 Room status code sending to the PMS
XX06 Room status processing is executed by operations on Front Desk Terminal
XX07 Message Waiting, Restriction Level, Wake-Up Message sending to PMS
XX16 Sending of detail information of C.O. outgoing calls to SMDR Terminal/PMS
which is set to "4" by CMD001-80/100/120
XX17 Sending of detail information of C.O. outgoing calls to SMDR Terminal which
is set to "5" by CMD001-80/100/120
XX21 Sending of detail information of Tie Line outgoing calls to SMDR Terminal
which is set to "4" by CMD001-80/100/120
XX22 Sending of detail information of Tie Line outgoing calls to SMDR Terminal
which is set to "5" by CMD001-80/100/120
XX30 Sending of detail information of C.O./Tie Line incoming calls to SMDR Termi-
nal, which is set to "4" by CMD001-80/100/120
XX31 Send call information for C.O. outgoing calls through CCIS
Note: "XX" in the DATA column denotes the Station Class Number assigned by CMD015.
CHAPTER 3
Page 398
Revision 2.2

[CMD016] Station Features

TITLE:
STATION FEATURES
1ST DATA
+ +
DE
(4 digits)
1ST DATA
MEANING
JANUARY, 1999
2ND DATA
+ +
DE
(0/1)
ND-45669 (E)
Addendum-002
EXE
2ND DATA
0 : Not sent
1 : Send
0 : No
1 : Yes
0 : No sent
1 : Sent
0 : Not sent
1 : Send
0 : Not sent
1 : Send
0 : Not sent
1 : Send
0 : Not sent
1 : Send
0 : Not sent
1 : Send
0 : Not sent
1 : Send
Initial Data
: