[Cmd102] Additional Memory Clear - NEC NEAX 2000 IVS Command Manual

CMD102
COMMAND CODE
D102
1. FUNCTION:
When mounting additional memory (SRAM card), this command is used to delete its stored data.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
ST + D102 +
Note 1: By entering the 1st data "0000", the status of the additional memory (SRAM card) will display
as follows:
0 0 X
Note 2: Before clearing system data by this command, make the following switch setting on the PN-AP00
card.
SW1
ON
CHAPTER 3
Page 410
Revision 2.0

[CMD102] Additional Memory Clear

TITLE:
ADDITIONAL MEMORY CLEAR
0000
DE + +
(4 digits)
0 : SRAM card was not mounted
1 : SRAM card was initialized
4
3
: Position to be set
2
1
DE + CCC + EXE
ND-45669 (E)
AP OFF LINE