[Cm62] Tenants For Each Att Group - NEC NEAX 2000 IVS Command Manual

COMMAND CODE
62
1. FUNCTION:
This command is used to assign which tenants are handled by each ATTCON Group.
2. PRECAUTION:
(1) This command requires a system reset after data setting.
(2) Multiple tenants can be assigned to one ATT Group, but one tenant cannot be assigned to more than
one ATT Group.
3. ASSIGNMENT PROCEDURE:
ST + 62Y +
4. DATA TABLE:
Y
No. MEANING
0 ATT GROUP 0
1 ATT GROUP 1
2 ATT GROUP 2
3 ATT GROUP 3
[CM62] Tenants For Each Att Group
TITLE:
TENANTS FOR EACH ATT GROUP
TENANT
NUMBER
DE + +
(2 digits)
TENANT
No. MEANING
00 Tenant 00
63 Tenant 63
ND-45669 (E)
DATA
DE + + EXE
(1 digit)
SETTING DATA
No.
0
1
Initial Data
:
RELATED
COMMAND
MEANING
To be handled CM60 YY = 00
Not to be handled
CHAPTER 3
Revision 2.0
CM62
INITIAL
Page 235