NEC NEAX 2000 IVS Command Manual page 413

CMD000
COMMAND CODE
D000
DATA
72 The Authorization Code is printed out.
76 Sending call information for tandem calls through CCIS
77 Sending of detail information of tandem calls to SMDR terminal,
which is set to "4" by CMD001-80/100/120
78 Sending of detail information of tandem calls to SMDR terminal,
which is set to "5" by CMD001-80/100/120
79 Contents of tandem call information to be sent to CCIS or SMDR
terminal
87 Send the Check Out Message ON/OFF Report to the PMS when
the PBX receives the Check Out Message from the PMS
88 Send the message to the PMS, where the Check Out station is orig-
inating a C.O. call
103 Designation of Printer Line Feed Code
(Depends on the printer provided)
114 Send the Controlled Restriction message to the PMS when
setting the Do Not Disturb feature
115 Send the Controlled Restriction message to the PMS when
setting the Room Cut Off feature
116 Send the Message Waiting message to the PMS when setting the
Message Waiting feature
119 The Maid Status message to the PMS when setting the Maid
Status by guest room telephone or the front desk instrument
134 The Wake Up message to the PMS when setting the Wake Up
feature
135 The result of Wake Up message when performing the Wake Up
call feature
136 Send text (Message Waiting control text sending is available) to
VMS when resetting PN-AP00
137 Number of digits for station number in message format to commu-
nicate with message center
CHAPTER 3
Page 370
Revision 2.1
TITLE:
SYSTEM FEATURES (1)
1ST DATA
FUNCTION
ND-45669 (E)
Addendum-001
AUGUST, 1998
2ND DATA
0 : No
1 : Yes
0 : Not sent
1 : To send
0 : Not sent
1 : To send
0 : Not sent
1 : To send
0 : Only outgoing call information
1 : Both outgoing and incoming call
information
0 : Not sent
1 To send
0 : Not sent
1 To send
0 : CR
1 CR and LF
0 : Not sent
1 To send
0 : Not sent
1 To send
0 : Not sent
1 To send
0 : To send
1 Not sent
0 : Not sent
1 To send
0 : Not sent
1 To send
0 : To send
1 : Not sent
0 : 6 digits
1 : 8 digits
Initial Data
: