NEC NEAX 2000 IVS Command Manual page 144

COMMAND CODE
18
MAT
4. DATA TABLE:
(1) Pilot System
Y
No. MEANING
0 Setting of Station num-
bers included in a Station
Hunting Group
1 Kind of Station Numbers
included in a Station
Hunting Group
TITLE:
STATION HUNTING GROUP
STATION NUMBER (A)
DATA
X Station Number (A)/
Data Station Number (A)
XXXX
When assigning station numbers to a Station Hunting Group, only two station
numbers can be assigned per operation. By repeating the operation as often as re-
quired, all the station numbers to be included in a Station Hunting Group can be
assigned. The two station numbers to be assigned with one operation are defined
as Station Number (A) and Station Number (B).
For example, when defining a Station Hunting Group for a Pilot System using Sta-
tion Numbers 300, 301, 302, designate 300 as the pilot station number, and per-
form the following two operations:
1st Operation
2nd Operation
As seen above, one station can be either Station Number (A) or Station Number
(B). Station Number (A)/(B) is used to identify which of the two station numbers
is to be assigned first.
X Station Number/
Data Station Number
XXXX
ND-45669 (E)
MEANING DATA
X
XXXX
Station Number (A)
300
301
1
0
CM18
Initial Data
:
SETTING DATA
MEANING
Station Number (B)/
Data Station Number (B)
Station Number (B)
301
302
Pilot Station of Pilot System
Member Station of Pilot
System
CHAPTER 3
Page 119
Revision 2.0