Led Indications; Connectors - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
Table 6-14 COIB(8)-U20/U30 ETU Default Switch/Jumper Settings
Switch/
Jumper
Reset N/A
5.6.4

LED Indications

Refer to Table 6-15 COIB(8)-U20/30 ETU LED
Table 6-15 COIB(8)-U20/30 ETU LED Indications
LED
LIVE
LED 1 Channel 1 status
LED 2 Channel 2 status
LED 3 Channel 3 status
LED 4 Channel 4 status
LED 5 Channel 5 status
LED 6 Channel 6 status
LED 7 Channel 7 status
LED 8 Channel 8 status
5.6.5

Connectors

The following connector is included:
CN1
Setting
Description
ETU status Operation
Stopped (Power
Connects to the backplane.
Document Revision 3
Description
Resets the
U20/U30
COIB(8)-
ETU.
Indications.
On Flashing
Normal
Operation
On)
Busy Not Used
Busy Not Used
Busy Not Used
Busy Not Used
Busy Not Used
Busy Not Used
Busy Not Used
Busy Not Used
Off
No
Power
Idle
Idle
Idle
Idle
Idle
Idle
Idle
Idle
6 - 41