Installing Dtu/Dtp Line Cards And Plastic Panels; Line Card And Plastic Panel Installation - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
S 6 I
ECTION NSTALLING
6.1
___________________________________________________________________________________
System Hardware Manual
DTU/DTP L
INE

Line Card and Plastic Panel Installation

Line key designations are entered on the Line Card that is then placed on the
Multiline Terminal to provide a quick reference of key designations. The Line
Cards can be changed as necessary. The Plastic Panel is placed on top of
the Line Card to hold it in place.
1. Place the Line Card over the keys on the Multiline Terminal.
2. Place the tabs on the bottom of the plastic panel in the grooves at the
terminal bottom, and press top right and left ends to secure plastic panel
to the Multiline Terminal. Refer to
on a DTU/DTP Multiline
Figure 10-14 Installing Line Card and Plastic Panel
C P
ARDS AND LASTIC
Figure 10-15 Installing Plastic Panel
Terminal.
on a DTU/DTP Multiline Terminal
Document Revision 3
P
ANELS
10 - 13