Removing The Wall Mounted Multiline Terminal From The Base Plate; Wall Mounting The Base Plate On A Switch Box - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
13.1.3

Removing the Wall Mounted Multiline Terminal from the Base Plate

To remove the Multiline Terminal, press the tabs at the bottom as
shown in Figure 8-43 Removing the Multiline
on the Telephone until it comes loose.
Figure 8-43 Removing the
13.1.4

Wall Mounting the Base Plate on a Switch Box

1. Locate the screw holes on the base cover and hang the cover
over the screws on the switch box as illustrated in
Wall Mounting Base Plate on Switch
Figure 8-44 Wall Mounting Base Plate on Switch Box
Document Revision 3
Terminal, and push up
Multiline Terminal
Figure 8-44
Box.
8 - 33