NEC Electra Elite IPK II System Hardware Manual page 590

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
13 - 22
5. Plug the other end of the short telephone cord in the modular
wall jack in the center of the wall plate.
6. Place the base unit on the posts of the wall plate and push
down until it is firmly seated.
Figure 13-17 Placing the Base Unit on the Posts of the Wall Plate
7. Plug the AC adapter into a standard 120 Vac wall outlet.
Do not use an outlet controlled by a wall switch.
AC
Adapter
Figure 13-18 Plugging the AC Adapter into the AC Wall Outlet
Wide Blade
Installing Cordless and Wireless Telephones
Electra Elite IPK II