Removing An Etu From The Ksu - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
2.3
___________________________________________________________________________________
6 - 6

Removing an ETU from the KSU

1. To unlock the ETUs, move the slide bar to the left.
2. Lift the ejector tab on the ETU and pull the ETU out of the slot.
Figure 6-6 Lifting the Ejector Tabs on the ETU
3. To secure remaining ETUs, move slide bar to the right.
Electra Elite IPK II
Installing ETUs (Circuit Cards)