Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
9 - 16
3.3.2
Installing AP(A)-R or AP(R)-R Unit on a Multiline Terminal
The AP(A)-R or AP(R)-R Unit should be installed after the switches
are set.
When wall mounting the Multiline Terminal, a WM-R Unit must be
used. Refer to
8-29.
1.
Prepare Multiline Terminal for adapter installation. Refer to
Section 2 Preparing Multiline Terminal for Adapter Installation
on page
2.
Plug the tabs marked A and B into adapter slots, then snap the
tab on the other end of the adapter into the receptacle marked
C . Refer to
the Multiline
Installing Electra Elite IPK II Optional Terminal Equipment
Section 13 Wall Mounting Multiline Terminals on page
9-1.
Figure 9-17 Attaching the AP(A)-R/AP(R)-R Unit to
Terminal.
Electra Elite IPK II