Installing Line Cards And Plastic Panels; Installing The Line Card And Plastic Panel - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
S 8 I
ECTION NSTALLING
8.1
___________________________________________________________________________________
8 - 22
L C
INE ARDS AND

Installing the Line Card and Plastic Panel

Line key designations are entered on the line card that is then placed on the
telephone to provide a quick reference of key designations. The line cards
can be changed as necessary. The plastic panel is placed on top of the line
card to hold it in place.
1. Place the line card over the keys on the Multiline Terminal.
When replacing an existing plastic panel or line card refer to paragraph
8.2 Removing the Plastic
Line Card
Figure 8-24 Installing Line Card and Plastic Panel on a Multiline Terminal
2. Place the plastic panel over the line card and push the corners of the
plastic panel until they click into place.
Plastic Panel
Figure 8-25 Installing Plastic Panel on a DTH/DTR Multiline Terminal
P P
LASTIC ANELS
Panel.
Installing Electra Elite IPK Multiline Terminals
Electra Elite IPK II
Multiline Terminal
Multiline Terminal