Paging Connections; Connecting The Pc To The Ksu - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
S 4 P
ECTION AGING
When connecting External Paging, the PGD(2)-U10 ADP is the interface with Paging
In/Out, Background Music (External Speaker) Out and/or External Tone Ringer/Night
Chime Out.
S 5 C
ECTION ONNECTING A
To use the PC Programming, specialized software must be installed in the user PC
and the PC must be connected using a serial port to the KSU.
5.1
___________________________________________________________________________________
7 - 2
C
ONNECTIONS
KSU
TO A

Connecting the PC to the KSU

Using a DB9 straight cable, connect the PC to one of the COM ports on the
side of the KSU. Refer to
The functions and the communication port connections are:
Function
PC Programming/Station
Message Detail
Recording (SMDR)
Serial-port characteristics include:
Characteristic
Baud Rate
Parity
Stop Bit
Data Bit
Port Type
Installing Electra Elite IPK II KSU Common Optional Equipment
P C
ERSONAL OMPUTER
Figure 7-2 Connecting a PC to the
COM 1
Value
38.4 K (maximum)
None
1 stop bit
8 bits
DCE
Electra Elite IPK II
KSU.
Port