Installing Flash Drive On The Vmp( )-U40 Etu - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
7.5.3

Installing Flash Drive on the VMP( )-U40 ETU

Use the following instructions to install the Flash Drive.
1. Remove the VMP( )-U40 ETU and selected Flash Drive from
the box.
2. Locate slot CN6 on VMP( )-U40 ETU.
3. The side with the SanDisk name in large red letters should be
facing up, as shown in
the VMP( )-U40
Figure 6-68 Installing the Flash Drive on the VMP( )-U40 ETU
The Flash Drive goes in only one way, and does not take much
force to insert it.
Figure 6-68 Installing the Flash Drive on
ETU.
Document Revision 3
6 - 123