NEC Electra Elite IPK II System Hardware Manual page 440

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
9 - 34
4. Plug the IP-R Unit in Connector 1 on the Multiline Terminal
(DTH-8D/16D/32D-1/2) as shown in
the IP-R Unit.
Optional
Connector
Figure 9-35 Plugging in the IP-R Unit
5. Attach the base plate by lining up the four tabs on the base
cover with corresponding slots on the terminal as shown in
Figure 9-36 Attaching the Base
direction of the arrows until it clicks in place.
Figure 9-36 Attaching the Base Plate
Installing Electra Elite IPK II Optional Terminal Equipment
Electra Elite IPK II
Figure 9-35 Plugging in
IP-R Unit
Connector 1
Plate, and slide the cover in the