NEC Electra Elite IPK II System Hardware Manual page 304

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
6 - 162
Switch Settings
The CNF(16)-U20 ETU has the following switches.
DIP switch SW1
Refer to Table 6-58 CNF(16)-U20 ETU Dip Switch
switch has four selector switches:
SW1-1 Restores ETU Port and /Modes settings to
H
SW1-2 Defines either Simple or Advanced Mode.
H
SW1-3 Defines the 16 Port configuration.
H
SW1-4 Defines the 8 Port configuration.
H
Table 6-58 CNF(16)-U20 ETU Dip Switch SW1
Multimedia ETU Port and Mode
8-Port Simple Mode
16-Port Simple Mode
8-Port Advanced Mode
16-Port Advanced Mode
RESET Switch SW2
This switch allows the technician to reset the CNF(16)-U20
ETU without having to remove and insert it again in the KTS.
Rotary Switch SW3
This switch is a 16-position (0~9,A~F) rotary switch to select
display options. Refer to
Switch SW3.
Table 6-59
Position
0
0
0
Factory Default.
SW1-1 SW1-2
OFF
OFF
OFF
OFF
Table 6-59 CNF(16)-U20 ETU Rotary
CNF(16)-U20 ETU
Channel Status
CH8 (DS1) ON
CH7 (DS2) ON
CH6 (DS3) ON
Installing ETUs (Circuit Cards)
Electra Elite IPK II
SW1. This
SW1-3 SW1-4
ON OFF ON
ON ON OFF
OFF OFF ON
OFF ON OFF
Rotary Switch SW3
Channel Status
CH16 (DS1) OFF
CH15 (DS2) OFF
CH14 (DS3) OFF