Ctp( )-U10 Etu; Description; Checklist Of Components - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
7.3
___________________________________________________________________________________
System Hardware Manual

CTP( )-U10 ETU

7.3.1

Description

This ETU is a multiplatform system that supports a maximum of 16
ports.
This ETU is a PC platform installed in the Electra Elite IPK II that
contains data storage for voice recording and application software.
A digital signal processor/voice processing section handles the
following functions:
DTMF detection
DTMF generation
General tone detection
FAX CNG tone detection
PCM compression for audio recording/playback
Automatic gain control (AGC)
Two USB 1.0 ports for USB Keyboard and Mouse support
One 15-pin VGA connector for VGA monitor support
7.3.2

Checklist of Components

This section describes the steps for assembling a CTP( )-U10 ETU.
Confirm that you have all of the components for the installation. If
you did not receive all the components, call your sales
representative.
CTP( )-U10 ETU
Memory SO-DIMM 256M
DSPII-U10 Unit, two for 12- or 16-port installations
Drive
Document Revision 3
6 - 103