Switch Settings - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
3.3.1

Switch Settings

The AP(A)-R Unit and AP(R)-R Unit have three switch locations.
Refer to Table 9-3 AP(A)-R/AP(R)-R Unit Switch Settings
description of each switch and an explanation of the settings.
Figure 9-16 AP(A)-R Unit/AP(R)-R Unit Switches
Table 9-3 AP(A)-R/AP(R)-R Unit Switch Settings
Switch
SW1-1
SW1
SW1-2
SW3-1
SW3
SW3-2
Dip
Switch DSW
es 1~8
(DSW)
Description/Settings
Connects to Multiline Terminal (Default).
Not Used
Sets impedance to 600 Ω for devices such as
modems or facsimile machines.
Used for complex impedance devices such as
Single Line Telephones.
Leave switches at default.
Document Revision 3
for a
9 - 15