Document Revision 3
___________________________________________________________________________________
8.2
___________________________________________________________________________________
6 - 146
BSU(2S)-U20 ETU
8.2.1
Description
The BSU(2S)-U20 ETU is the Base Station Interface Unit Slave ETU
that provides connection for two additional Base Stations when
connected to the BSU(4M)-U20 (Master) ETU.
A maximum of two BSU(2S)-U20 ETUs can be installed in the Basic
or Expanded Electra Elite IPK II system.
8.2.2
Installation
The BSU(2S)-U20 ETU (Slave) is installed on four corner posts on
the front of a BSU(4M)-U20 ETU or on the front of a BSU(6S)-U20 or
on front of another BSU(2S). Slave ETUs are cascaded on posts to
the left of the BSU(4M)-U20 in accordance with the tables below.
Only two BSU(2S)-U20 ETUs can be installed in the Basic or
Expanded Port Package of the Electra Elite IPK II.
Figure 6-80 BSU(2S)-U20 ETU
Installing ETUs (Circuit Cards)
Electra Elite IPK II