Section 15 Wall Mounting A Multiline Terminal - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
S 15 W
ECTION
(WM-R U
The Wall Mount Unit is used to attach any DTH/DTR/IP connection Multiline Terminal
(except the DTR-2DT-1 TEL and the ITR-4D-3 TEL) to the wall. This unit connects to
the back side of the telephone.
When adapters are used, the Multiline Terminal must be installed on the wall using
the WM-R Unit.
1.
2.
3.
4.
___________________________________________________________________________________
System Hardware Manual
M M
ALL OUNTING A
)
NIT
Plug line cord in the wall receptacle. Leave about eight inches of cord and
bundle the rest.
Feed the line cord through the opening in the wall mount unit as illustrated in
Figure 8-61 Attaching the Wall Mount Unit to the
Attach the WM-R Unit using six screws.
Figure 8-61 Attaching the Wall Mount Unit to the Wall
Install the Multiline Terminal over the four tabs on the base cover, and push
down until it clicks in place as illustrated in
Terminal to the Wall Mount
T
ULTILINE ERMINAL USING THE
Unit.
Document Revision 3
W M
ALL OUNT
Wall.
Figure 8-62 Attaching the Multiline
U
NIT
8 - 43