NEC Electra Elite IPK II System Hardware Manual page 431

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
1. Prepare Multiline Terminal for adapter installation. Refer to
Section 2 Preparing Multiline Terminal for Adapter Installation
on page 9-1.
2. Plug the tabs marked A and B into adapter slots, then snap the
tab on the other end of the adapter into the receptacle marked
C . Refer to Figure 9-26 Attaching the CT(U)-R Unit to the
Multiline Terminal.
Figure 9-26 Attaching the
Multiline Terminal
3. Replace the base plate (or wall mount unit) and attach the line
cord. Refer to Section 3 Connecting a Multiline Terminal to the
System on page
CT(U)-R Unit
8-15.
Document Revision 3
to the
9 - 25