Installing The Ps(A)-R Unit - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
9 - 42
Table 9-11 Volume/Contrast Display Using PSTN Line
Volume/
Contrast
HANDSET None [Volume is controlled by PS(A)-R.]
SPEAKER None (Cannot be used for PSTN line.)
RING None [Volume controlled by PS(A)-R switch.]
OFF-HOOK None (Cannot be used for PSTN line.)
RING
LCD LCD contrast
BGM None (Not Used)
3.8.6

Installing the PS(A)-R Unit

1. Turn over the ITR terminal, remove the LAN and headset
cables, and disconnect the AC adapter when it is being used.
2. Raise the Base stand in the direction of the arrow until it locks
in the fully expanded position.
Installing Electra Elite IPK II Optional Terminal Equipment
Display
Figure 9-40 Raise the Base Stand
Electra Elite IPK II