Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
9 - 26
4.
Attach the AC-2R/AC-3R to the CT(U)-R Unit. Refer to
9-5 Connecting the AC Adapter to an Installed Adapter on page
9-5.
3.5.2
Connecting the CT(U)-R Unit to the PC
Connect USB cable from the PC to the CT(U)-R Unit as shown in
Figure 9-27 Connecting the USB Cable to the CT(U)-R
Figure 9-27 Connecting the USB Cable to the CT(U)-R Unit
3.5.3
Installing the Optional Headset
Install the headset and anchor it in the cord slot on the Multiline
Terminal as shown in
Multiline Terminal on page
3.5.4
Installing the Driver on the PC
Using the download from Web with the CT(U)-R Unit install the driver
on your PC. Refer to the CT(U)-R Unit installation instructions for
installing the driver .
Installing Electra Elite IPK II Optional Terminal Equipment
Figure 9-23 Attaching the Headset to the
9-22.
Electra Elite IPK II
Figure
Unit.