Wall Mounting The Telephone - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
12 - 6
3.1.1

Wall Mounting the Telephone

1. Remove the metal base from the telephone by removing the
two screws as illustrated in
Base.
Note Position of
2. Lift the metal plate and note the direction of the tabs so that
they can be correctly reversed.
3. Flip the metal base around as illustrated in
Reattaching the Metal
receptacles marked (A) and reattach to the telephone using the
two screws that were previously removed.
Because of manufacturing variations in wall-mount brackets,
installing the terminal wall mount with optional screws offers the
most reliable fit.
Figure 12-5 Removing the Metal
Figure 12-5 Removing the Metal Base
Base. Insert the tabs into the
Installing Single Line Telephones
Electra Elite IPK II
Figure 12-6