NEC Electra Elite IPK II System Hardware Manual page 314

Document Revision 3
___________________________________________________________________________________
LED
LED 1, AP1
Application Software
LED 2, AP2
LED 3, DRIVE
LED 4, CF PWR
LED 5, ICGA
LED 6, Switch S3
Indication
LED 7, Shutdown
LED 8, Power
LED 9, FED DSP
LED 10, CH1
LED 11, CH2
LED 12, CH3
LED 13, CH4
LED 14, CH5
LED 15, CH6
LED 16, CH7
___________________________________________________________________________________
6 - 172
8.9.4 LED Indications
Refer to Table 6-66 VMP(4)/(8)-U( ) ETU LED
Table 6-66 VMP(4)/(8)-U( ) ETU LED Indications
Description
Running without
errors
Running with errors
Not Running
Not Used
Hard Drive Access
Power to the ETU
Live LED
Do not remove Voice
Mail from KSU
Safe to remove Voice
Mail from KSU
Receiving KSU
power
For development only
Off/On-Hook status
Off/On-Hook status
Off/On-Hook status
Off/On-Hook status
Off/On-Hook status
Off/On-Hook status
Off/On-Hook status
On
Green
Amber
Red
Not Used
Red if accessed
Red if power is on
Not Used Red every
125ms during
Red when S3 in
RUN
Red when S3 in
SHUTDOWN
Red if power is on
Not Used
Red for Off-Hook
Red for Off-Hook
Red for Off-Hook
Red for Off-Hook
Red for Off-Hook
Red for Off-Hook
Red for Off-Hook
Installing ETUs (Circuit Cards)
Electra Elite IPK II
Indications.
Flashing Off
Not Used Not Used
Not Used Not Used
Not Used When not
accessed
Not Used No power to
ETU
Operation is
shutdown
operation
Not Used S3 not in RUN
Not Used S3 not in
SHUTDOWN
Not Used No KSU power
Not Used Not Used
Not Used On-Hook
Not Used On-Hook
Not Used On-Hook
Not Used On-Hook
Not Used On-Hook
Not Used On-Hook
Not Used On-Hook